ScriptBasic:UsersGuide 9.2

From ScriptBasic
Revision as of 00:09, 8 December 2007 by John Spikowski (talk | contribs) (9.2. Strings)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

[Contents]

9. General Language Format

9.2. Strings

[<<<] [>>>]


Strings are most frequently used entities in a BASIC program. As you could already see in the very first example strings are quoted with double quote. But they can be more than just characters between double quotes. String as a type is a basic data type of ScriptBasic. A variable having string value contains several bytes. There is no length limit for a string other than the virtual memory of the machine. A string may contain character of any code even characters that have the ASCII code zero. In other words a string is a collection of bytes of certain length. You can treat strings as arbitrary length of binary data if you need.

Strings can be concatenated, you can cut off a part of a string and several other functions and operators can handle strings. ScriptBasic automatically allocates the space required to store the string and releases the unused space when the string is not needed anymore. For more information on string handling operators and functions see the chapter Command reference.

The simplest form of a string is a strings constant appearing in the source file. This is the form like in the example


print "Hello World\n"

Here you can note that there is a special character at the end of the string denoted by two characters. This may be familiar from other languages. The characters \n mean a new line character in a readable form. The \ (backslash) character is the escape character in a string altering the meaning of the character that follows it. The special characters that ScriptBasic handles are:

  • \t is converted to a tabulator character.
  • \n is converted to a new line character.
  • \r is converted to a carriage return character.
  • \" is converted to a double quote character. This is the way to include a double quote character into the string.
  • \0-9 is converted to ASCII code, see details later.

All other characters remain the same after a backslash. This means that you can write \\ to have a string containing a backslash character, or \" to have a string containing a double quote character, but \a means nothing else than the letter a.

There is another way to include special characters into string constants. The usual way in BASIC is to split the string into sub strings and concatenate the parts during run time, like in the code fragment:


St = "This is a special string, containing a bell character at the end" & chr(7)

You can do this in ScriptBasic, but you can do it easier and more effective:


St = "This is a special string, containing a bell character at the end\7"

The last character is a number preceded by a backslash. Whenever numbers follow a backslash character in a string ScriptBasic calculates the value of the numbers and uses the character of the code. If the first character after the backslash is zero then the number is treated as octal number, otherwise it is treated as a decimal number.

Strings should not contain the new line character. In other words


St = "this is
a multi line
string of three lines."

is not legal in ScriptBasic. It was legal in former versions before v1.0build15 to write multi-line strings, but it caused problem to programmers forgetting the closing double quote character on a line. Instead a new string constant format was introduced that starts and ends with three double quote characters. For example:


St = """this is
a multi line
string of three lines."""

is perfectly correct. Strings starting and ending with three " characters can, but need not span multiple lines. There is another difference between single-line and multi-line strings. A multi-line string may contain a double quote character without escaping with backslash. You can write:

St = """this is " a double quote character """

or you can write


St = """this is \" a double quote character """

which is also correct. The only situation where you should escape a double quote character in a multi-line string is when you want to have three or more " characters following each other in a string. For example

St = """this is """ three double quote characters """ THIS IS WRONG

is wrong. You have to type instead:


St = """this is \""" three double quote characters """

or


St = """this is "\"" three double quote characters """

or


St = """this is ""\" three double quote characters """

or


St = """this is \""\" three double quote characters """

or some other variation of escaping one or more of the consecutive " characters. The rule is that there can not be three consecutive un-escaped " characters inside a multi-line string.

There is another constrain regarding multi-line strings. The very first character of a multi-line string should not be the character & or it has to be escaped with the backslash character. Thus:


St = """\& is a
multi-line string starting with an & character """

is the correct format. If you use the & character without escaping it as the very first character of a multi-line string it will be treated as a binary multi-line string.

A binary multi-line string is a very special beast that only hard code users need to specify binary data inside a BASIC program. In such strings all new-line characters are ignored unless escaped with the back-slash character. Thus the following two strings

 """&is a
 binary multi-line\n string starting with an & character """

 "is a binary multi-line\n string starting with an & character "
 

are equivalent with the exception that the second string is a liar, because that is not a binary multi-line string. Single-line strings can not be binary, and in case the first character of a single-line string is the & character that is just treated as a normal character.


[<<<] [>>>]